Description
Application Area
1. All untreated concrete, brick and natural stone work on driveways, patios, walkways and garage floors.
2. Obaproof WaterPruf Sealer can be applied to the back and sides of the marble or granite. Let the material cure for 6 hours before installation. This will ensure that no water passes through areas that have been treated thus eliminating watermarks on the surface of the marble or granite installation.
3. It can be applied as a primer which penetrates the surface and thus prevents fungus growth.
Surface Preparation
• Ensure surfaces are clean, dry and free from dirt, grease and efflorescence (a whitish substance).
• Check all caulking and sealing are fully cured before applying Obaproof WaterPruf Sealer.
Application
• Use a brush, roller or low pressure air spray to apply.
• Application of this material will be on flooding action. Apply several coats wet on the basis, until the substrate is saturated. Do not leave a long break between coats.
• Any material that is not absorbed in a few minutes should be wiped up.
Coverage
Approx. 1.5 – 4 sq.m / litre
Cleaning of Tools
Clean tools and equipment with white spirit after use.