Description
Characteristics & Advantages
• Good depth of penetration
• Resistant to alkalis
• Rapid development of water repellency
• Provides good adhesion for paints
• Water-based and environmentally friendly
Storage
Keep away from direct sunlight.
Uses
• Water repellent for many absorbent mineral substances substrates such as bricks, sand-lime brick, natural sandstone and mineral plasters.
• Not suitable for less absorbent mineral substances like limestone, marble and reinforced concrete for bridges and roads.
• Serves as a water-repellent primer for emulsion paints, plasters, silicone resin emulsion paints, and silicon resin plasters.
• Can also be used for mass treatment of non-load-bearing concrete products.
Application
• Apply No Leak 888 two “”wet on wet”” coats, on a dry clean surface.
• Allow the first coat to dry for approximately 4 hours, depending on the current ambient temperature and flood the second coating on the current treated surface to provide ultimate protection.
Cleaning of Tools
Clean all tools and application equipment with water immediately after use. Hardened or cured material can only be removed mechanically.
Safety
Wash immediately with clean water and seek medical assistance in case of contact with eyes.