Description
Characteristics & Advantages
• Low bubbling
• Good mechanical and chemical properties
• Can apply directly on damp or wet surfaces
• Improved concrete properties
• Strengthen the water resistance, anti-impact, and water resistance for cement and mortar, and further enhance its anti-slip and anti-bending features
• Ultimate adhesive strength
• Non-toxic
• Enable the filling element with good compatible
• Compressive strength
• Non-corrosive
• Non-flammable
• Anti-freezing
• Less dusting
• Low VOC
• Environmentally Friendly
• Flexural strength
• Impermeability
• Superb adhesive strength
Application Area
• Waterproofing primer
• Manhole liners
• Repair mortar
• Bonding agent
• Angle fillets
• Multi-purpose adhesive
• New and old concrete bonding agent
Pot Life / Shelf life
Shelf Life
One year when unopened and undamaged.
Storage
Store in a dry and cool place.
Uses
Obaproof CM-700wp is a higher strength floor screed and improved flexibility and resistance to cracking. Obaproof CM-700WP can also be used as a bonding agent between new and old concrete.
Surface Preparation
All the surfaces must be clean, free from grease, oil, laitance, and remove all the dirt and contaminants, which might affect adhesion.
The impurities outside the structure body should be cleaned thoroughly.
Application
Use Obaproof CM-700WP for quality modification of cement and mortar. In the hydrolysis medium, the emulsion is a stable dispersed polymer. When used, this emulsion improves the combined characteristic of the softness with mortar. Add Obaproof CM-700WP to the mortar, which first softens, then cures, and finally becomes hard, wear-resistant, and durable with anti-bending properties.
Bonding Agent/Primer:
Dilute 1 part of Obaproof CM-700wp permeable primer with 3 parts of clean water, then plaster directly to the surface to be waterproofed to improve bonding.
Mixing
Cement Modifier:
Patching, repairing mortar and rendering.
• Cement: 50kg • Sand: 150kg • Obaproof CM-700WP: 5kg • Water: 15kg
Technical Data
• Density: 1.01kg/Ltr
• Solid Content: > 45%
• Application Temperature: Minimum 5°C
• Mixing Ratio: CM-700WP : Water 1 : 3
• Chemical Resistance (10% HCOOH, 60°C, 24hrs): No change on the surface of the sample
Safety
Impervious gloves and barrier cream should be used when handling these products. Eye protection should be worn, In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist. If contact with skin occurs, it must be removed before curing takes place. Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.