Description
Characteristics & Advantages
• Impervious to rain and water splashes
• Elastic, waterproofing membrane
• High weather resistance and UV resistance
• Easy to apply by using brush or roller
• Good penetration in cracks, and resistant to cracking
• Able to absorb expansion and shrinkage movement without cracking
• Good bonding to various substrates
• Water-base and non-flammable
• Odourless and non-toxic
Application Area
• Waterproofing of flat (horizontal) roofs and on other types of substrates, including concrete decks/roofs, asbestos roofs, roof tiles (either concrete or clay type), cement mortar, metal/zinc roofs, and tiles.
• Waterproofing layer under tiles, e.g. balcony.
• Vertical wall coating against surface water infiltration, bricks with plaster layer, mortars, roof tiles, repair of tiles and zinc eaves.
Pot Life / Shelf life
Storage
Store properly in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +30 °C.
Coverage
Coating System Product Consumption
Primer Coat Obaproof WP-500FIBRE diluted with 10% of water -0.4kg/m²
First Coat Obaproof WP-500FIBRE -0.75kg/m²
Second Coat Obaproof WP-500FIBRE -0.75kg/m²
Overcoating
• Waiting Time / Overcoating: Tack free after 1-2 hours (at +30°C)
Mixing
• Mix Obaproof WP-500FIBRE manually or use a low-speed mixer until it is completely homogeneous prior to application.
Cleaning of Tools
• Obaproof WP-500FIBRE should not be used in places where it is in permanent contact with water (water tanks, swimming pool, shower area, toilets, wet kitchen, etc.) flooding and/or condensation.
• Obaproof WP500FIBRE should be applied as a finishing paint.
• Do not place any sharp or piercing objects on the cured Obaproof WP-500FIBRE.
• Obaproof WP-500FIBRE is not recommended in areas with constant or very long contact with water (immersed in water for a very long period).
• A minimum of 2 coats (not inclusive of primer) must be applied as a waterproofing system.
Technical Data
• Density: 1.25 ± 0.03kg/l
• Solid content by weight: 68%
• Solid content by volume: 55%
• Volatile Organic Compound (VOC) content: < 50g/l
• Viscosity: ~128 KU
• Tensile Strength: ~2.2N/mm²
• Elongation at break ASTM412 : ~155%
• Applied Product Ready for Use: Total full cure ~60 hours (at +30°C)
Safety
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Safety Data Sheet (SDS) containing physical, ecological, toxicological and other safety-related data.