Hot Sell

Product Filters

Showing all 6 results

  • Hot Sell

    AB Top Coat 117 (25kg per set )

    Obaproof AB Top Coat 117 is cement based waterproofing coating incorporates 2 polymer components.Apply directly to concrete to prevent water infiltration & low voc. Obaproof AB Top Coat 117 can be used :basements, terraces and balconies and bathroom floors.
    Application: Add Obaproof AB Top Coat 117 (Part B 20kg) gradually to the Obaproof AB Top Coat 117 (Part A 5kg) and mix thoroughly until it blends completely with cement compound.Use mixture within 30 minutes. Apply or plaster first and finish coat of Obaproof AB Top Coat 117 to construction surface by using brush, roller or spray method.The time interval between coats shall be 4-8 hours, and make sure that the first layer of plastering has been dried and formed as membrane.
  • Hot Sell

    Obaproof waterpruf sealer 1L


    Obaproof waterpruf sealer is colorless waterproofer. It provides a good penetration capacity and good alkaline resistance. waterproof back of marble or granite : Obaproof waterpruf sealer can be applied to the back and sides of the marble or granite. Let the material to cure for 6 hours before installation . This will ensure that no water passes through areas that have been treated thus eliminating watermarks on surface of the marble or granite installation. Before use Obaproof waterpruf sealer have to ensure surfaces are clean, dry and free from dirt, grease and efflorescence ( a whitish substance) and check all caulking and sealing is fully cured before applying Obaproof waterpruf sealer. It can use a brush, roller or low pressure air spray to apply. application of this material will be on flooding action. Apply several coats in wet on basis , until the substrate is saturated. Do not leave long break between coats. Any material that is not absorbed in a few minutes should be wiped up. approx 1.5-4 sq.m/litre

  • Exclusive

    PU-1000wp 18kg


    Obaproof PU-1000wp is a water-based PU bituminous waterproofing. It will bond perfectly to almost any surface such as concrete, masonry, metal and timber. It can application by brush, roller ,high pressure single hose spray machine.

  • Latest

    QQ-SET 18L


    Obaproof QQ-set is a water reducing plasticzing and accelerator admixture specially designed for concrete and mortar mix. Obaproof QQ-set contains special reactive material and additives; it reduces the water cement ratio, accelerates the cement hydration, reduces initial setting time, reduces shrinkage and improves work ability,resulting in increase early strength of the concrete. Obaproof QQ-set should dispersed in water before added to the concrete or portland cement mortar mix. Add Obaproof QQ-set to the gauging water at the rate of 1000ml per 100kg portland cement mortar mix.

  • Exclusive

    Slate Seal 800 18L


    Obaproof slate seal 800 is a specially formulated colourless protective coating with added Ultra Violet (UV) additive for treatment of interior and exterior concrete surfaces against scratching. Obaproof slate seal 800 suited for slate, quarry and paver tile, stamped concrete and concrete tile. All surfaces must be dry, clean free from dust, grease and efflorescence.Repair chip-off or concrete surfaces and make sure surface free of water. Apply by brush, roller or spray.For normal application 2 coats are sufficient. Coverage about 7 square meter /litre.

  • Hot Sell

    UV-2000wp 18kg (white & light grey)


    Obaproof UV-2000wp is a solvent free single compoent elastomeric liquid. Obaproof UV-2000wp can be applied to R.C. walls, plastered walls, retaining structures, concrete, slate or metal roof tiles, asbestos cement sheets, retaining walls, etc. It can application by brush, roller ,high pressure single hose spray machine.